Cleaning And Maintenance - Polar Refrigeration GF489 Manual Del Usuario

UK
The LED display lighting can be switched ON/OFF by pressing the

Cleaning and Maintenance

Always switch off and disconnect the power supply before cleaning
Warm soapy water is recommended for cleaning. Cleaning agents may leave harmful residues. DO
NOT wash the base unit, instead wipe the exterior with a damp cloth.
Empty and clean the drip tray reguarly.
A POLAR agent or qualified technician should carry out repairs if required.
Removing / dis-assemblying the Tap for Cleaning
1. Remove the handle pin (A)
2. Remove the handle (B)
3. Remove the spring (C)
4. Remove the handle seat from the tap
5. Remove the tap piston and guide
To re-assemble and fit the tap reverse above
Removing the Bowl
Removing Lid
1. Lift rear of lid
2. Slide lid and remove
DO not submerge lid in liquid as this will damage the Display Light housed in the underside of the lid. Wipe
clean with a damp cloth and sanitizing solution
All manuals and user guides at all-guides.com
button (see Fig 1)