Event Log - LEGRAND 407 75 Manual Del Usuario

During printing
Printer
initialising
Printer
fault

Event log

Power ON
dd/mm/yy hh:mm:ss
Power OFF
dd/mm/yy hh:mm:ss
Batt. disch.
dd/mm/yy hh:mm:ss
Central 1 OFF
dd/mm/yy hh:mm:ss
Central 1 OK
dd/mm/yy hh:mm:ss
B01 : V.M.C.
dd/mm/yy hh:mm:ss A
B01 : V.M.C.
dd/mm/yy hh:mm:ss R
Wait. Printing will begin when printer initialising is finished.
The printer is out of order or unconnected to the repeater panel.
Press twice and check the printer and its connection to the
repeater panel before starting printing again.
Power-up of the repeater panel. Occurrence No.
xx
Date and hour of the event.
Power-down of the repeater panel. Fault No. in the log.
xx
Date and hour of the event.
End of autonomy of the repeater panel. Occurrence No.
xx
Date and hour of the event.
Control unit 1 (Central 1) is not connected to the repeater panel
xx
or its autonomy is coming to an end. Occurrence No.
Date and hour of the event.
Reconnection or power-up of the control unit (central).
xx
Occurrence No.
Date and hour of the event.
Change of loop state (No. 01 is for the V.M.C.).
xx
Occurrence No.
Date and hour of the event. A = appearance of the loop fault.
Change of loop state (No. 01 is for the V.M.C.).
xx
Occurrence No.
Date and hour of the event. R = repair of the loop fault.
GLOSSARY
17