After-Sales Service; Serial Numbers; Cleaning And Maintenance - Martinelli MILANO Pliko Mini Manual Del Usuario

Ocultar thumbs

página de 24

/ 24
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

12• 5-POINT SAFETY HARNESS: to fasten, insert the two

buckles of the waist strap (with attached shoulder

straps, arrow a) into the leg divider strap until they

click into place (arrow b). To unfasten them, press the

button which is situated in the centre of the fastener

(arrow c) and pull the waist strap outwards (arrow d).

1 3• To tighten the waist strap, pull on both sides in the

direction of the arrow (Fig. a). To loosen it do the

opposite. The waist strap can be tightened as far as the

safety lock (Fig. b).

1 4• It is possible to set the safety harness at 3 different

heights, depending on how tall the child is. As the

child gets bigger, the harness must be moved to a

higher position.

1 5• To adjust the height of the safety harnesses, release

the two buckles on the rear of the backrest.

Pull the shoulder straps towards you (arrow a) until the

buckles are released and insert them in the backrest

loops (arrow b). Remove the shoulder straps from the

sack (arrow c) and insert them in the most appropriate

buckle (arrow d), then reattach the two buckles

behind the backrest (arrow e). The buckles are securely

attached when a click is heard (fig f).

1 6• LEG REST ADJUSTMENT: The leg rest can be set in 2

different positions. To lower the leg rest, pull the two

side levers downwards and at the same time lower the

leg rest. To raise the leg rest, push it upwards until it

clicks into position.

BACKREST ADJUSTMENT: The backrest can be set in 3

positions: To lower the backrest, lift the levers on both

sides at the same time and lower it, locking it in the

position required. To lift the backrest, push it upwards.

17• FOLDING UP: pull one lever followed by the second

lever upwards until you hear them click (fig_a); then,

hold the central handle (fig_b) and pull it upwards

until the stroller folds up.

When folded, the stroller will stand upright (fig_c).

18• CARRYING: The stroller can be conveniently carried

(with the front wheels set on stationary) by the central

handle (fig_a). It can also be carried by the side handle

(fig_b).

19• REMOVABLE LINING: to remove the lining from the

stroller, unhook the fasteners on the rear of the

backrest (fig_1), slip the fastener of the leg divider out

from under the seat (fig_2), loosen the two screws

(on both sides) using a screwdriver to keep the nut

fastened (fig_3),

20• unhook the elastic from the chassis (fig_4), unhook the

chassis (fig_5, see OPENING paragraph, point 1), slide

the sack off the chassis (fig_6),

2 1• slide the sack off the footboard (fig_7).

and pull the sack upwards (fig_8).

SERIAL NUMBERS

2 2

The Stroller PLIKO MINI has all the following

•

relevant information behind the backrest: product

name, date of manufacture and serial number.

This information is required for any complaints.

ACCESSORIES

2 3•

U MBRELLA: Practical parasol (fig_a).

BORSA: diaper-Changing Bag with pad for changing

the baby (fig_b).

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the weather:

water, rain, or snow; prolonged and continuous

exposure to bright sunlight may give rise to colour

changes of various different materials; store this

product in a dry place.

regularly.

CLEANING THE CHASSIS: periodically clean all plastic

parts with a damp cloth. Do not use solvent or

similar cleaning products; keep all metal parts dry to

prevent rusting; keep moving parts clean (adjustment

mechanisms, locking mechanisms, wheels, ...) and free

of dust and sand and, if necessary, lubricate with light

machine oil.

CLEANING THE RAIN CANOPY: wash with a sponge and

soapy water; do not use detergents.

CLEANING FABRIC PARTS: brush fabric parts to remove

dust and wash by hand at a maximum temperature of

30°C; do not wring; do not use chlorine bleach, do not

iron; do not dry clean; do not apply solvent-based stain

removers and do not dry in a tumble dryer.

MARTINELLI IS A PEG PEREGO BRAND

PEG-PÉREGO S.p.A.

Peg-Pérego S.p.A. is an ISO 9001

certified company. This certification is a

guarantee for customers and consumers

of the transparency and trustworthiness

of the company's procedures and

working methods.

Peg Pérego can make changes at any time to the

models described in this publication for technical or

commercial reasons.