AneX cross Manual De Mantenimiento página 14

Ocultar thumbs Ver también para cross:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
STROLLER
ASSEMBLING / DISASSEMBLING
Unbox this stroller's frame and put it horizontally on
the floor (fig. 1). Disable the lock against accidental
EN
unfolding (fig. 2). Pull upwards vigorously till the system
is secured, while holding the handle (you should hear a
specific sound) (fig. 3, 4). To fold the frame press and hold
the red button, located on the frame`s right lever. Then
simultaneously pull the levers, located on both sides of
the frame (fig. 5). Slightly pull the frame up to the original
position (same when packed) (fig. 1). For efficiency and
convenience, the frame can be folded together with the seat
without removing the seat unit from the frame (fig. 1).
HANDLE HEIGHT ADJUSTMENT
Simultaneously press the round buttons, placed
parallel on both sides of the handle. Set comfortable
handle height for you (fig. 6).
WHEEL MOUNTING / DISMOUNTING
OF THE REAR WHEELS
Before mounting a wheel, insert an axle, while holding the
red button (fig. 7). Release the button to fix the axle
(you should hear a specific sound). To mount a wheel, press
its center button, then mount wheels on an axle till it stops,
release button and slightly pull until it locks (fig. 8). To
dismount a wheel, press at its midpoint and pull along the
axle till its final removal (fig. 8). A wheel can be removed
without axle, but the axle can be removed by pressing
the red button (fig.7).
INSTALLATION / REMOVAL OF THE FRONT
CASTER WHEELS / LOCK
The stroller`s frame is equipped with two front swivel
wheels, which rotate 360° on its axle. To install front wheels,
you have to insert the fork axle into the wheel. Next, press
the axle with the fork until you hear a distinctive sound.
To dismount front wheel press vertically the button located
above this wheel. A wheel can be dismounted together with
the axle (fig.9). To secure the rotary wheels system,
turn the regulator located below the dismounting
button (fig. 10).
In addition, you can move the stroller only forward on
All manuals and user guides at all-guides.com
PRE-USE PROCEDURES
unlocked wheels. You can not push the stroller back. This
prevents curving the frame and loosening the wheels.
BRAKE
The stroller is equipped with parking brakes, which
block its rear wheels (fig. 11). To stop the stroller you
need to press rear wheels blocking pedal (fig. 11).To
continue moving, you need to reset the pedal (fig.11).
SHOCK ABSORPTION
The stroller has a steel-ring shock absorption system and
shock absorption on the frame to improve your baby's
comfort. The spring shock absorption mechanism is
regulated using a special switch located under the shock
absorber (fig. 12). Always adjust both sides equally.
PORTABLE CRADLE MOUNTING /
DISMOUNTING
To mount the portable cradle, place the adapters into the
adapter pockets, located on the frame's inner side (fig. 13).
The portable cradle adapters are blocked automatically.
To dismount the portable cradle, press the buttons
of the portable cradle adapters, while lifting it up (fig. 13).
If necessary, you can remove the bassinet's lining for
washing (fig. 14, 15). To do this, you have to lift the bassinet's
backrest and then carefully remove the lining by unzipping
two zippers. Besides, you have an option of removing and
washing the coconut mattress protector. The bassinet's
backrest is located under the coconut mattress. You can
adjust the backrest's height using the controller, which is
located below the bassinet (fig. 16).
PORTABLE CRADLE HOOD, FEET COVER
The portable cradle features a conveniently foldable hood
protecting a child from wind, sun, snow and rain elements.
The position of the stroller's canopy is regulated by two
mechanisms. They lock it in an open position and offer
a memory button for unlocking the position. To fold the
canopy, you don't have to press two buttons simultaneously.
All you have to do is press the button on one controller all
the way in (you should hear a distinctive sound) and then
do the same on the other controller. Then you can fold the
canopy with one hand (fig. 17). To unfold the canopy, all

Publicidad

Tabla de contenido
loading

Tabla de contenido