General Characteristics - TigrusELEC 45200 Manual De Instalación Y Mantenimiento

ENGLISH
IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be
implemented for installation and start-up. Therefore, the installer as well as the user must read the instructions
before beginning installation and start-up.
Keep this manual for future reference.
To achieve maximum performance from the TigrusELEC POOL CLEANER, it is important to follow the instructions indicated below.

1. GENERAL CHARACTERISTICS

The TigrusELEC electric pool cleaner uses its internal electric motor as its power supply. It is connected to the electrical outlet by means of the
separate power supply.
The power of its electrical motor enables it to move around automatically and randomly while it sucks up the dirt, which is stored in the tank of
the TigrusELEC. WE RECOMMEND REGULAR CLEANING OF THE TANK.
There is no risk of the wheels causing wear of the liner.
The TigrusELEC can work on all kinds of surfaces of pool lining (liner, mosaic tile, gunite,...).
2. UNPACKING
IMPORTANT: Check that the machine has not been damaged in any way during transport (bumps, broken pieces,...). If you observe any
abnormality, contact the sales person before using the TigrusELEC.
Unpack the elements of the TigrusELEC following the procedure indicated below:
1. Open the box
2. Read the contents of this manual carefully
3. Extract the whole TigrusELEC unit
4. Unstick the 4 small tabs
5. Open the 4 "walls"
6. Remove the cardboard block of the TigrusELEC
7. Take out the rest of the electric cable from the bottom of
the box
8. In the bottom of the box you will find the power supply.
3. CHECK THE CONTENTS OF THE PACKAGING
Inside the box you will find the following:
1. TigrusELEC
2. Power supply
3. Installation and maintenance manual
4. INSTALLATION
For your safety and the correct operation of the cleaner, position the electrical power supply according to the following indications:
•
The electrical power supply must be a minimum distance of 3.5 m away from the edge of the swimming pool.
• It must not be exposed to the sun.
•
It must be situated on a horizontal and stable surface.
• DO NOT USE ANY TYPE OF ELECTRICAL EXTENSION LEAD.
All manuals and user guides at all-guides.com
2