Technical Data; Intended Use; Safety Informations - BGS technic 3650 Manual De Instrucciones

Pistola neumática de arenado con accesorios
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Pneumatic Sandblaster incl. Accessories

TECHNICAL DATA

Grain size: 46 - 100
Working pressure: 6 - 8 bar (90 -116 psi)
Air consumption: 184 l/min (6.5 cfm)
Air inlet: 1/4"
Recommended hose: 10 mm (3/8")
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This air sandblasting gun is ideal for many applications in the car body area and all metallic surfaces.
The sandblasting gun is used for removal of rust, excessive dirt, coatings, etc., and is suitable for
using with normal corundum with a grain size of 46 to 100. The compressed air sandblasting gun is
easy to use and has a lower consumption by reusing the grain.

SAFETY INFORMATIONS

When using pneumatic tools, fundamental precautionary measures must always be ensured in order
to reduce the risk of personal injury and property damage.
• Keep children and unauthorised persons away from the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do allow untrained persons work with this tool set.
• Ensure that the trigger is located in the OFF position when being connected to the compressed
air system.
• Do not carry out any modifications on the tool.
• Use only accessories that are dimensioned for use with compressed air tools.
• Disconnect the tool from the compressed air supply before installing accessories, when carrying
out maintenance work or the device is not being used.
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
ID
6
e
s
s
a r t S
h
c
s
m
e
R
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
BGS 3650
L
d . l h
a t s
w
s
@
o f n i
: l i

Publicidad

Tabla de contenido
loading

Tabla de contenido