PANCONTROL PAN IR-T650 Manual De Instrucciones página 27

All manuals and user guides at all-guides.com
Temperature measurement °C/°F
1. Hold the measuring device using the handle and point it at the test object.
2. Press the test button (trigger) to switch on the device and to start the
measurement process.
3. If the battery is not empty, the display switches on and shows the
measured value. If not, please change the battery.
4. If you release the test button (trigger), HOLD is shown in the display.
5. Press the UP - button to turn the laser on and off or the DOWN - button
to turn the background lighting on and off.
6. The meter turns off automatically after 7 seconds, when the LOCK
function is not activated.
The measuring device automatically compensates the ambient temperature.
This may take upto 30 minutes in case of large temperature differences.
MODE Function
Press the MODE button to select the
desired function.
By repeatedly pressing the MODE button,
you can change the settings for EMS, LOCK
ON / OFF, HAL ON / OFF and LOW. The
flow chart shows the corresponding
sequence.
EMS Function
The emissivity describes the
energy-emitting properties of materials.
The emissivity can be adjusted from 0.10
to 1.0.
EMS adjustment
LOCK on/off
HAL on/off
HAL adjustment
LOW on/off
LOW adjustment
EN 9