Logic3 i-Station Studio Manual Del Usuario

Thank you for purchasing the Logic3 i-Station Studio for use with iPod, the latest in our long and established range
of speakers. As with all Logic3 products, the i-Station Studio has been built to the highest manufacturing standards,
to bring you the very latest and advanced technology available. This product has been designed specifically to work
with iPod and has been certified by Logic3 to meet Apple performance standards.
Packaging Contents
 i-Station Studio
 Remote Control
 Power Cable UK
 Power Cable Euro
 Line-In cable
 Adaptor Cradles
Power
1. Connect the Power Cable to the AC connection on the back of the MIP199 and to your AC mains power
socket.
2. Press the POWER button on the top of the unit or the 'I/
the unit ON / OFF.
Set Clock
1. Switch the unit OFF
2. Press and hold the TIME button on the unit , the hours display will begin to flash
3. Press the PRESET button to switch between 12 and 24 hours clock mode
4. Press the TUNING + or - buttons on the unit or the 'FF/TUNER+', 'RW/TUNER-' buttons on the remote
control to adjust the hours.
5. Press the TIME button and the minutes display will begin to flash
6. Press the TUNING + or - buttons on the unit or the 'FF/TUNER+', 'RW/TUNER-' buttons on the remote
control to adjust the minutes
7. Press the TIME button on the unit or the remote control to set the time or if the unit is left idle for 15
seconds the selected time will be set automatically.
8. Press the PRESET button to switch between 12 and 24 hours clock mode
All manuals and user guides at all-guides.com
MIP199 User Manual
POWER' button on the remote control to switch