Firmware Updates; Controller - Retro-Bit RB8-64 Manual De Instrucciones

EN FIRMWARE UPDATE/ DUAL MODE OPTIONS
FIRMWARE UPDATE
Wii U™ AND PS3™
Upgrade firmware via PC or Mac
• Press and hold START+L+R on the RB8-64 Bluetooth
seconds. A RED light will begin blink.
• Use the enclosed USB
to your PC.
• Download the RB8-64 Bluetooth
www.8bitdo.com website and run the 8Bitdo_update.exe file in Windows
folder(for WIN user), or in Mac
• Select the xxx_firmware.dat firmware file and run the update.
DUAL MODE OPTIONS
Your RB8-64 Bluetooth
Joystick
1. On your Android/iOS/PC Activate your Bluetooth
2. On the RB8-64 Bluetooth
you see a blue light flash. Once the blue light starts flashing you are in
pairing mode.
3. Scan for Bluetooth
4. When detected, tap "RB8-64 Bluetooth
5. If asked for pairing code (password), enter "0000".
6. Your devices are now paired and communicating with each other.
Touch Screen Simulator
Note: Android needs ROOT access
1. Download the official 8Bitdo
com.
2. Follow the instructions on page Fast Startup Figure, to turn on the RB8-64
Bluetooth
3. Run the 8Bitdo
"RB8-64 Bluetooth
4. If asked for pairing code (password), enter "0000".
5. In EmuTouch screen mode, press START+Z to activate in 8Bitdo
6. Finally, drag and drop buttons in order to map the keys to your satisfaction.
Press START+Z to finish setup.
Join the conversation! Follow us on:
6
All manuals and user guides at all-guides.com
cable to connect the RB8-64 Bluetooth
®
Controller has dual mode options for game play
®
Controller, press and hold the Start button until
®
devices on your Android/iOS/PC device.
®
APP/APK from the official site at www.8Bitdo.
®
Controller in mode 4.
®
app and scan for Bluetooth
®
Controller" to pair.
®
®
Controller upgrade software from the
®
OS folder (for Mac
® ®
function.
®
Controller " to pair.
®
devices. When detected tap
®
@retrobitgaming
Controller for 3
®

Controller

®
OS user).
app.
®