Transportation And Storage; Care And Cleaning - s-gard SKYGARD 2.0 Manual E Información Del Fabricante

Manufacturer's instructions and information

TRANSPORTATION AND STORAGE

Transportation
The protective clothing is supplied in a polybag.
Use suitable transport bags if you wish to transport the protective clothing.
Storage
Store the S-GARD® protective clothing in the following conditions:
protected from environmental influences
„
protected from light
„
USE
Inspections before application
Before use, make sure that the following prerequisites for safe use have been met:
All the closures are fully functional.
„
The protective clothing shows no signs of damage or heavy soiling.
„
The protective clothing is dry and turned outwards.
„
The protective clothing is suitable for your height.
„
Application
1. Put on the protective clothing.
2. Close all closures (collars, front zip, sleeves, trouser hem).
3. Make sure that the following requirements have been met:
The protective clothing is not too tight-fitting and not too loose.
„
The jacket and the trousers overlap sufficiently even when performing stretching
„
movements with the arms and legs.
Any items of clothing worn underneath do not protrude, even when performing ex-
„
tensive stretching movements with the arms and legs.
In case of any doubt, select a different size.
4. Put on supplementary protective clothing.

CARE AND CLEANING

Preparing for cleaning
1. Empty the pockets.
2. Close hook-and-loop fasteners, buttons and zip fasteners.
3. Remove any snap hooks, pendants or other metal parts.
4. Remove any detachable accessories.
5. Set the width adjustments to maximum width.
20
en