Behringer XD8USB Manual Del Usuario página 31

4. To adjust the pattern volume, press VOLUME
and adjust using + or –. (You can hear your
drum playing better by turning down the
pattern volume.)
5. Press TEMPO and the current tempo will be
displayed. Press + or – to adjust.
DRUM OFF
1. Press DRUM OFF to mute/unmute the drum
track from the pattern play.
VOICE
You can change the sound (voice) of each pad, and
save your settings as a new user kit.
1. Press VOICE and the current voice number will
be displayed.
2. Press the pad button of the drum or cymbal
you want to change.
3. Press + or – to choose from 123 different
sounds. Press the pad to listen. Note that the
Hi-Hat has four options.
4. If required, press VOLUME and adjust the voice
volume using + or –.
5. When you like the way the pads sound,
save this as a new user kit. Press SAVE/REC
and press + or – to choose from 11 to 15.
6. Press SAVE/REC again to save the new user kit.
CLICK
1. Press CLICK to start the metronome and
display the current signature.
2. Press + or – to change the signature.
3. Press TEMPO to display the current tempo.
4. Press + or – to adjust the tempo.
5. Press CLICK again to stop the metronome.
Quick Start Guide
Recording
1. Press-and-hold SAVE/REC to enter
recording mode.
2. If desired, press + or – to select a kit.
3. Press START/STOP and recording will begin in
a few seconds.
4. Play the drum kit, and your playing will be
recorded as pattern 41.
5. Press START/STOP again to stop the recording.
Playback
6. While Pattern 41 is displayed, press START/
STOP to play the recording.
7. To play your recording later, press PAT and
press + or – to select pattern number 41.
31