Technical Data - Flora Best KH 4206 Instrucciones De Uso

Intended Use
This product is intended for use in the
irrigation of domestic gardens, in
conjunction with a water barrel fitted
with a tap valve. It is not intended for
commercial or industrial applications or
for use in agriculture or greenhouses.
The warranty does not compensate for
damage caused by improper use of the
appliance!
Items supplied
1 Garden hose, 5m
1 Connection piece with filter housing
4 Connecting crosses
9 Conducting hoses, each fitted with 4
x 40 cm drip tubings:
3 x 60 cm long
3 x 120 cm long
3 x 240 cm long
3 Termination bungs
1 Operating manual

Technical data

Throughflow: 0 ,1 - 0,3 l/h per drip tubing
(dependant on water pressure)
Safety instructions
• Do not permit children to handle the
product without supervision, as they
cannot correctly assess the potential
risks of injury. Children could put some
of the small parts into their mouths
and swallow them.
• Read these operating instructions
carefully before using the appliance
for the first time and preserve this
booklet for later reference. Pass this
booklet on to whoever might acquire
the appliance at a future date.
The appliance components
Garden hose
Connection pieces with filter housing
Conducting hose with drip tubing,
various lengths
Connecting cross
Termination bung
Installing the set
Take all appliance components out of the
carton and remove all packaging and
adhesive foils.
> Unwind the garden hose
all required conducting hoses .
> Push the connecting piece
end of the garden hose .
> Should it be that you wish to use only
one of the conducting hoses , push
its connector firmly into the opening
on the connector piece
> Should it be that you wish to use several
conducting hoses , first of all insert
the narrow supplemental piece on one
of the connector crosses firmly into
the opening on the connector piece .
> Subject to how many conducting
hoses you wish to use, insert the
narrow supplemental piece of the
additional connector crosses firmly
into the opening on the previously
assembled connector piece .
> Now insert the connectors of the
conducting hoses being used firmly
into the openings of the connector
crosses .
> The openings not being used are each
to be closed off with the termination
bungs .
- 5 -
as well as
into one
.