Power On/Off; Video Recording - Wiseup DVR-0031-1080P Guia Del Usuario

III. Operation
>> Before using, make sure that the smoke detector camera is fully recharged.
>> Please make sure the Micro SD card (4GB-32GB, format it for the first usage) is securely fitted
into the camera's SD card slot, or it will not work. A SDHC Class 10 Micro SD card is recommended.
If the Micro SD card cannot be read, the camera will not respond correctly to your operation.

3.1. POWER ON/OFF

3.1.1. Slide the power switch to the ON position. Power on the camera by pressing the Power
Button for 3 seconds. The blue indicator light will stay illuminated, indicating the camera has
entered into standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 3 seconds again, then slide the
power switch to the OFF position. The blue indicator light will flash twice and then turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation more than 1
minute.

3.2. VIDEO RECORDING

3.2.1. Slide the power switch to the ON position. Power on the camera by pressing the Power
Button for 3 seconds. The blue indicator light will stay illuminated, indicating the camera has
entered into standby mode automatically.
3.2.2. Press the Video Recording Button once to record video. The blue indicator light will flash
twice and then turn off.
3.2.3. Press the Video Recording Button once again to stop recording video. The blue indicator light
will stay illuminated, indicating the camera is back to standby mode.
[Notes]:
1). A video file will be generated and saved every 10 minutes automatically.
2). The smoke detector camera can record video continuously for 2.5 hours on a full charge.
3).Video Resolution: 1920×1080P Video Format: AVI
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Slide the power switch to the ON position. Power on the camera by pressing the Power