AmazonBasics B010QZCT5W Instrucciones De Montaje página 7

Step D: Align the base with the holes, then use a socket wrench with a 13 mm socket to insert the
two M8 × 80 mm lag bolts.
Step E: Continue to "Step 3: Determine the orientation of the monitor" on page 10.
Concrete wall mount
WARNING: Mounting holes must be located within solid concrete, not mortar or covering material. If you drill into an
area of concrete that is not solid, reposition mounting holes until both anchors can be fully inserted into solid concrete.
Anchors that are not fully set in solid concrete will not support the applied load resulting in an unstable, unsafe condition
which could lead to personal injury and/or property damage. Consult a construction professional if you have any doubt
about what this means in regard to your particular situation.
Step A: Use a level and pencil to draw a vertical line where you want to locate the mount.
7