Descargar Imprimir esta página

Publicidad

Enlaces rápidos

AUTOMOTIVE PRODUCTS, INC.
ITEM
1
2
3
4
5
ARTÍCULO
1
2
3
4
5
ARTICLE
1
2
3
4
5
1.
Remove contents from box. Verify that all parts listed are present and free from damage. Read all installation instructions carefully be-
fore attempting installation.
2.
If the vehicle is equipped with factory tow hooks. Tow hooks must be removed before installation. Lossen the long 18mm bolt & nut, and
loosen the 18mm short bolt from the vehicle frame securing the tow hook. Pull the tow hook forward of the vehicle. Some vehicles have
a plastic valance covering the front frame section. This area must be trimmed to accept the light bar assembly. Customer can also opt to
aquire a 4WD valance.
3.
Insert the lower mounting flanges through the bumper valance to the front section of the vehicle frame. Align the slots with the tow hook
holes on the frame. Factory tow hook and hardware can be reinstalled with this product.
4.
If installation is on a vehicle without tow hooks; Insert an M12 stud plate through the frame opening to each mounting hole location. Due
to vehicle variations, some vehicles will only utilize three total attachment points.
5.
Use the M12 flat washers, M12 lock washers, and M12 hex nuts to secure the light bar.
6.
Align light bar as desired and tighten all supplied fasteners to 35-45 lbs-ft.
Westin Automotive Products, Inc.
5200 N. Irwindale Ave. Ste 220
Irwindale, Ca 91706
INSTRUCTIONS—INSTRUCCIONES—CONSIGNES
APPLICATION: CHEVROLET SILVERADO/GMC SIERRA 1500 07-10
QUANTITY
1
4
4
4
4
CANTIDAD
1
4
4
4
4
QUANTITE
1
4
4
4
4
Part # : 37-02275, 37-02270
DESCRIPTION
LIGHT BAR
M12 X 40MM STUD PLATES
M12 X HEX NUTS
M12 FLAT WASHERS
M12 LOCK WASHERS
DISCRIPCIÓN
BARRA DE FAROS
PLANCHAS DE PERNO M12 X
40MM
TUERCAS DE AOJO M12 X
RONDANAS PLANAS M12
RONDANAS DE FIJACIÓN
M12
DESCRIPTION
RAMPE DE PHARES
M12 X 40MM PLAQUES A
GOUJON
M12 X ECROUS HEXAGO-
NAUX
M12 RONDELLES PLATES
M12 RONDELLES-FREIN
TOOLS NEEDED
18MM WRENCH
18MM SOCKET AND RACHET
TORQUE WRENCH
HERRAMIENTA NECESARIA
LLAVE DE 18MM
DADO DE 18MM Y MA-
TRACA
LLAVE DE TORSIÓN
OUTILS NECESSAIRES
18MM CLE
18MM DOUILLE ET CLIQUET
CLE DYNAMOMETRIQUE
Thank You for choosing Westin products
For additional installation assistance please call
Customer Service (800)793-7846

Publicidad

loading

Resumen de contenidos para Westin 37-02275

  • Página 1 INSTRUCTIONS—INSTRUCCIONES—CONSIGNES APPLICATION: CHEVROLET SILVERADO/GMC SIERRA 1500 07-10 Part # : 37-02275, 37-02270 AUTOMOTIVE PRODUCTS, INC. ITEM QUANTITY DESCRIPTION TOOLS NEEDED LIGHT BAR 18MM WRENCH M12 X 40MM STUD PLATES 18MM SOCKET AND RACHET M12 X HEX NUTS TORQUE WRENCH M12 FLAT WASHERS M12 LOCK WASHERS ARTÍCULO...
  • Página 2 INSTRUCTIONS—INSTRUCCIONES—CONSIGNES APPLICATION: CHEVROLET SILVERADO/GMC SIERRA 1500 07-10 Part # : 37-02275, 37-02270 AUTOMOTIVE PRODUCTS, INC. Saque el contenido de la caja. Verifique que las piezas nombradas estén presentes y libres de daños. Lea cuidadosamente todas las instruc- ciones de instalación antes de intentar la instalación.
  • Página 3 INSTRUCTIONS—INSTRUCCIONES—CONSIGNES APPLICATION: CHEVROLET SILVERADO/GMC SIERRA 1500 07-10 Part # : 37-02275, 37-02270 AUTOMOTIVE PRODUCTS, INC. Westin Automotive Products, Inc. Thank You for choosing Westin products 5200 N. Irwindale Ave. Ste 220 For additional installation assistance please call Irwindale, Ca 91706...

Este manual también es adecuado para:

37-02270