Insignia NS-R4111 Guia Del Usuario página 7

NS-R4111 Arm Band Radio
To secure your radio to your arm:
1 Put your arm between your radio and the strap and adjust the length of
the strap.
2 Press down on the Velcro piece to secure in place.
To use the belt clip:
1 Insert the belt clip into the back of your radio, then slide the clip to lock it
in place.
2 Secure your radio to your belt by holding your radio (with belt clip
attached), then slide the belt clip onto your belt.
3 To release the belt clip, press the center lock, then slide the clip off of
your radio
Note: The belt clip can also be used to attach your radio to the strap of a
handbag or tote.
Press
.
Press the lock to release the clip
Direction of release
www.Insignia-Products.com
Direction of lock
5