Charging The Battery - Unitech PA692A Manual Del Usuario

Charging the Battery

Before using the terminal for the first time, you need to charge it for about 24
hours. After that, you can charge the terminal for 3 hours to recharge the
battery to full capacity. Charge the terminal using the USB charging cable or
the docking station.
1. Press and hold the release button on both sides of the USB charging
cable and connect it to the PA692A
2. Plug the AC adapter cable into the power jack of the USB charging cable
3. Plug the AC adapter cord into an electrical outlet.
WARNING! Turn ON the backup battery switch before charging the battery.
Data you entered may not be properly stored until the built-in backup battery has
been adequately charged.
6