Cleaning And Maintenance - Mx Onda MX-PM2780 Manual De Instrucciones

CLEANING AND MAINTENANCE

1. Unplug the popcorn machine from the mains and wait the necessary time
to completely cool before cleaning it.
2. Remove the kettle to the outside of the popcorn machine as described in
the relevant section.
3. With a paper towel wipe cooking oil and popcorn that may be in the interior
and exterior of the kettle.
4. Clean the inside and the outside of the kettle with a cloth dampened with
soapy water, then dry with a cloth.
5. Clean the inside of the popcorn machine with a cloth slightly dampened
with soapy water, then dry with a cloth.
6. The housing or outside of the popcorn machine can be cleaned with a
slightly damp cloth.
7. Wash with soapy water metering casseroles.
8. Replace the kettle in its housing.
Note:
Never use scouring pads as they may damage and damage the surface, not
use abrasives, alcohol, solvents or gasoline. Carefully dry all surfaces with a
soft cloth.
STORING POPCORN MACHINE
•
Before storing the popcorn machine, this must be full-mind clean and dry.
•
Keep the popcorn machine in a dry, dust-free within its own packaging or
cover it with a protective bag.
•
Given the "retro" design style popcorn machine you can be placed
somewhere as a decorative element. Always free of dust and away from
direct sunlight.
All manuals and user guides at all-guides.com
7