Parts List - Tristar MX-4151 Manual Del Usuario

Parts list

Speed selector
Ejector
Dough hooks
Washer
Using the mixer
•
For the first use, cleaning the dough hooks and beaters.
•
Assemble proper beaters or dough hooks into mixer. Dough hooks are only used for mixing
dough and beaters are only used for beating eggs or similar food.
•
Note: Beaters can be inserted in either socket, as the beaters are identical. For dough hooks,
the one with washer can only be inserted into the big socket and the other one can only be
inserted into small socket. The two dough hooks cannot be inserted in reverse.
•
Ensure that the unit is at the OFF position, then plug in the power source.
•
Turn the speed selector to your desired setting, there is 4 setting. The appliance will start
working and the speed will achieve the highest speed if the Turbo Switch depressed at any
time.
•
The max operation time per time shall not exceed 5 minutes and minimum 10 minutes rest
time must be maintained between two consecutive cycles. When kneading yeast dough,
suggest the speed selector first use a low speed and then use high speed to achieve the best
results.
•
When mixing is completed, turn the speed selector to OFF position, unplug the cord from
power outlet.
•
If necessary you can scrape the excess food particles from the beaters or dough hooks by
rubber or wooden spatula.
•
Hold the beaters/dough hooks with one hand and press the Ejector button firmly down with
the other hand, remove the beater/dough hooks.
Note: Remove the beaters/dough hooks only at the OFF position.
Cleaning and Maintenance
•
Unplug the appliance and wait it completely cool down before clean.
•
Wipe over the outside surface of the head with a dampened cloth and polish with a soft dry
cloth.
•
Wipe any excess food particles from the power cord.
•
Wash the beaters and dough hooks in warm soapy water and wipe dry. The beaters and
dough hooks may be washed in the dishwasher.
All manuals and user guides at all-guides.com
Turbo switch
Beaters