Battery Status - Solar CarStart CS1000 Manual Del Usuario

Performance and Temperature
Performance of your CarStart will depend upon several factors:
• A good, solid connection between the CarStart clamps and the battery
and ground connections are a must. Moving the clamps back and forth while
connecting to the battery will help create a better connection.
• Clean connections between your vehicle or equipment battery and its terminals
are very important. For an optimal connection, corrosion (soft grayish-white build-
up) on battery terminals must be removed. With the ignition turned off, disconnect
the battery cables and clean the terminals and battery posts with a baking soda
solution.
• All batteries are affected by temperature changes, and the small, lightweight
battery in the CarStart is more sensitive to storage temperature than a standard
automotive battery. The ideal storage environment is room temperature, or 68ºF.
Press and hold the red battery level status button to display the battery status.
1. The CarStart comes with a wall mount charger.
2. Plug the wall charger into an AC outlet.
3. Plug the charger cord into the Recharge Jack on the front of the unit.
4. The right LED will turn on while the charger is plugged into AC power to indicate
the unit is charging.
5. We do not recommend charging the unit for more than 24 hours under normal
usage. Suggested recharge times are:
• Recharge the unit for 3 hours when the unit is used for jump starting.
• Recharge the unit for 12-24 hours under very high discharge conditions.
6. Press and hold the red button to check the battery charging status. When the unit
is fully charged, all LED's will light.
Despliegue LED - La prensa y tiene el botón rojo
3 Lichter. . . . . . . . . . Gut
2 Lichter. . . . . . . . . . Mitte
1 Licht . . . . . . . . . . . Tiefpunkt
Aufleuchten . . . . . . . Laden Sie auf
Immer auf,
*
Bitte merken Sie dieses Licht anzeigt, dass der Auflader arbeitet.
LED Ausstellung - Presse und hält roten Knopf
4 Lichter . . . . . . . . . Laden vollständig
Immer auf, wenn Auflader angeschlossen ist

Battery Status

3 lights . . . . . . . . . . Good
3 Lichter. . . . . . . . . . Gut
2 lights . . . . . . . . . . Medium
2 Lichter. . . . . . . . . . Mitte
1 light . . . . . . . . . . . Low
1 Licht . . . . . . . . . . . Tiefpunkt
Flashing . . . . . . . . . Recharge Unit
Aufleuchten . . . . . . . Laden Sie auf
Always On
Immer auf,
*
Please note this light indicates the charger is working.
*
Bitte merken Sie dieses Licht anzeigt, dass der Auflader arbeitet.
LED Display - Press and hold red button
LED Ausstellung - Presse und hält roten Knopf
Recharging the CarStart
4 lights . . . . . . . . . Charging complete
4 Lichter . . . . . . . . . Laden vollständig
Always On When Charger is Plugged In
Immer auf, wenn Auflader angeschlossen ist
3 lights . . . . . . . . . . Good
3 luces . . . . . . . . . . Bueno
2 lights . . . . . . . . . . Medium
2 luces . . . . . . . . . . Medio
1 light . . . . . . . . . . . Low
1 luz . . . . . . . . . . . . Bajo
Flashing . . . . . . . . . Recharge Unit
Destellar . . . . . . . . . Recargue la Unidad
Always On
Siempre En
*
*
Please note this light indicates the charger is working.
Note por favor que esta luz indica el corcel trabaja.
LED Display - Press and hold red button
4 lights . . . . . . . . . Charging complete
4 luces . . . . . . . . . . Cargar completo
Always On When Charger is Plugged In
Siempre En
wenn Auflader angeschlossen ist*
When Charger is Plugged In*
wenn Auflader angeschlossen ist*
When Charger is Plugged In*
Cuándo Corcel se Conecta*
Cuándo Corcel se Conecta