Mitsubishi Electric Jet Towel JT-SB216JSH-W-NE Manual De Instalación página 10

■ Switching the air speed switch and heater switch settings
Check the heater ON/OFF settings and air speed HIGH/STANDARD settings with the
customer beforehand.
(The user cannot adjust the settings after installation is complete.)
(The JT-SB216KSN-W-NE does not have an air volume switch or heater switch.)
Cautions
1. Remove the mounting screw (1) from
the switch box cover, and remove the
switch box cover.
8
2. Change the settings.
3. After checking the switches, fi x the
switch box cover back in its original
position.
1. Engage the groove of the front panel on the
appliance.
2. Reattach the front panel with the front
panel mounting screws (2).
3. Check that the front panel is fi tted securely.
9
4. Attach the air fi lter.
5. Check that the air fi lter is inserted correctly,
all the way to the back.
6. Attach the drain tank.
Do not install when the product (power cord) is electrifi ed.
Doing so may result in electric shocks.
OFF
STANDARD
※
Factory default settings
Settings
HEATER
AIR SPEED
Front panel
mounting
screws
− 10 −
Switches
Switch box cover
ON HEATER
Mounting
HIGH AIR SPEED
screw
OFF / ON
STANDARD / HIGH
Groove
Front panel
Drain tank
Main unit
Air fi lter