Megxon X34 Manual Del Usuario página 5

Using SD/MMC card (optional)
In addition to the internal built-in memory*, your
camera can store data on a Secure Digital (SD) card
or a MultiMedia card (MMC). To insert a memory card,
gently push the card as indicated until the card reaches
the bottom of the slot. When the card is successfully
inserted, a icon will appear on the LCD. To remove
the memory card, gently push the card and it will pop
up. Then pull the card out of the slot.
*
Built-in memory:
1) About the type of memory built in your camera, please refer to the package printing.
2) If your camera comes with built-in SDRAM instead of flash memory, you are
recommended to always use a memory card to store your recordings. The camera using
only built-in SDRAM can save just one recording (picture or video) in it. Moreover, the
file stored in SDRAM will be gone when the batteries run out of power or are being
replaced. Therefore you should always copy the file to your PC prior to taking out the
batteries.
The SD card comes with a write-protect switch. When the
write-protect switch is set to the "Lock" position, the card
will become non-writable. To ensure that the camera can
operate normally, you should set the write-protect switch
to the "Unlock" position before inserting the SD card.
If you purchase a new memory card, you are
recommended to format the card with the camera before storing data into the card.
Do not remove the SD/MMC card while the camera is processing data.
When a SD/MMC card is inserted, the camera will use the card as the main storage
medium. Files stored in the built-in memory will become inaccessible until the SD/MMC
card is removed.
All manuals and user guides at all-guides.com