Important note:
•
Table 3 shows the approximate dip switch settings according to distance. This parameter may vary
according to the quantity of wire used for system installation.
•
The distances may vary according to the wire quality also when the latter is made by the same
manufacturer as the devices.
•
The distances shown in the table refer to the use of colour cameras. Higher distances may be
obtained using black and white cameras.
•
Consider that the distances may decrease if the devices are used with DVR apparatuses.
TECHNICAL SPECIFICATIONS
Video output: ................................................................................................................................ female BNC
UTP cable input: ......................................................................................................................Terminal board
Recommended wire type:.................................................................................24 AWG UTP CAT5 or higher
........................................................................... Impedance 100 Ω ± 20%, resistance DC loop 18 Ω/100 m
BNC impedance: .......................................................................................................................................75 Ω
UTP impedance:......................................................................................................................................100 Ω
Power: .................................................................................................................................... 12 VDC (± 10%)
Consumption: .................................................................................................................................max. 80mA
Reachable distance *:.......................................................................................................................... 3000* m
Voltage surge protection:............................................................................................................................ Yes
Working temperature range:............................................................................................................... -10-45°C
Storage temperature range: ............................................................................................................... -30-60°C
Humidity:................................................................................................................................................. 0-95%
Dimensions (W x H x D) : .................................................................................................... 70 x 28 x 105 mm
Weight: .................................................................................................................................................... 130 g
* This value may be reached if the following are used for system installation:
•
22 AWG UTP CAT6 cable or higher
•
black and white camera.
•
active transmitter Ref.1092/302.
Important note:
Technical features may be subject to change without prior notice.
APPLICATIONS
Refer to table 4 to select the active and passive transmitters to be used for system installation according to
the distance between source and user.
Application
10
N. of
cameras
A
1
B
1
Table 4: distances with 24 AWG UTP CAT5 cable
Distances (m)
from
to
250
1200
1092/300
900
2100
1092/302
VIDEO BALUN
TX
RX
Ref.
Ref.
1092/303
Ref.
Ref.
1092/303
DS1092-018A