AEG BSS 4811 Instrucciones De Servicio página 42

English
42
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
• Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
2. Repeatedly press the FUNCTION button (13/1) until
"bt" appears in the display. The flashing of the indi-
cator light shows that the device is in pairing mode.
3. Chose the Bluetooth menu in your player and register
the device in your player. For this, refer to the opera-
tion manual of your player. The device "BSS 4811"
will show in your player as a selection.
NOTE:
Only one playback unit can be connected to the
speaker. If the speaker is already connected to
another playback unit, the speaker will not appear
in the BT selection menu.
4. Now enter the password "0000" in your player,
depending on the device manufacturers, model, and
software version.
The indicator lamp will light up after successful pairing.
For the further procedure, please refer to the user manual
of the playback unit. If possible, adjust the volume of the
external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the pairing of a playback
device, deactivate the Wi-Fi and Mobile data functions
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. The sound
however is not played back via the speaker. Once you
have ended the call, the devices will be re-connected
with each other. You may have to re-start playback.
• Reconnecting devices
This device is designed to support automatic re-connec-
tion.
The following conditions must be met:
- the devices need to have been paired with each
other before
- Bluetooth is activated in your player
- your player supports this function
The automatic reconnection will be activated after the
device has been switched on. This may last a few sec-
onds. The indicator lamp (10) will light up after successful
pairing.
USB port (7)
This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Repeatedly press the FUNCTION button (13/1) until
"USb" appears in the display.
2. Connect a USB storage device directly into the port.
Playback then begins. The display will show the elapsed
time.
For operation, please refer to the section "Description of the
controls".
NOTE:
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB port is not designed for charging external
devices.
CAUTION:
Before removing the USB storage device, switch the device
to another mode using the FUNCTION button (13/1).
Memory card slot (8)
1. Repeatedly press the FUNCTION button (13/1) until "Sd"
appears in the display.
2. Insert the memory card with the pins facing downwards
into the designated card slot. After a few seconds, the
total number of tracks will be displayed briefly. The
playback will start afterwards. The display will show the
elapsed time.
Please refer to chapter "Description of the controls" for
operation.
CAUTION:
Before removing the memory card, use the FUNCTION
button to switch to another mode.