Fimar EASY LINE ES-CJE6203 Manual Del Usuario página 11

Important:
Prior to Assembling the juicer please check this point: At the Main Body of the Juicing bowl there is
a rubber stopper. When in place the Rubber stopper ensures all of the juice only exits via the juice outlet. Before
Juicing always ensure that the rubber stopper is firmly in place (see Fig 2)
1. Assemble the Juicing bowl on the Main Body (see Fig
shaft of the Main Body.
2. Choose the strainer which you would like to use: Place the strainer into the spinning brush, align the dot on the
strainer keep in line with the dot on the Juicing bowl. When the dots are correctly aligned the strainer and
spinning brush will lock in place (see Fig 4).
3. Insert the squeezing screw into the strainer and turn until it drops into position (see Fig 5).
4. Assemble the hopper onto the Juicing bowl (see Fig 6).
5. Align the dot on the hopper with the dot on the Juicing bowl.
6. Twist the hopper so that the arrow on it points to the closed sign on the Main Body (see Fig 7).
Important:
To protect the motor and provide you with a long lasting machine, Slow juicer has an auto shutdown feature. If
the components are not aligned or installed correctly or the motor overheats due to extended juicing or the
strainer becomes clogged the machine will automatically shut down. This is normal and prevents damage to you
Slow juicer.If this happens switch the machine off. Check the components are correct installed and that there is
no food caught in the strainer. Wait 5 minutes for the motor to cool then recommence normal operation.
C. Assembly Instructions:
3),Make sure the Juicing bowl is all the way into the