Worx WT661K Manual Del Usuario página 4

cutting tools may contact hidden wiring or its own cord. Contact with a "live" wire will
make exposed metal parts of the tool "live" and shock the operator.
2) Use proper safety equipment. Wear safety glasses for eye protection, wear hearing
protection, and wear a protective mask to minimize breathing in the fine dust created while
sanding.
3) Clamp or secure work-piece when sanding.Clamping the work-piece prevents it from
being ejected from under the sander and leaves both hands to control the tool.
4) Always disconnect the plug from the power supply before changing sanding belts.
5) WARNING: Use of this tool can generate and disburse dust or other airborne
particles. Use special precautions when sanding chemically pressure treated
lumber, paint that may be lead based, or any other material that may contain
carcinogens. Always operate tool in a well ventilated area and provide for proper
dust removal and collection.
6) Always maintain a firm grip on the belt sander handles with both hands to prevent
loss of control.
7) Make sure the power switch is not "ON" before you plug the tool in. Accidental start-
ups could cause injury.
8) Save these instructions.Refer to them frequently and use them to instruct others who may
use this tool. If someone borrows this tool, make sure they have these instructions.
WARNING! Some dust created by power sanding, sawing, grinding, drilling and
other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paint
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically-treated lumber
Your risk to these exposures varies, depending on how often you do this type of work. To reduce
04
your exposure to these chemicals:
• Work in a well ventilated area
• Work with approved safety equipment, such as those dust masks that are specifically designed
to filter out microscopic particles.
The label on your tool may include the following symbols:
V...................................................................................................................................................................Volts
A..................................................................................................................................................................................Amperes
Hz.......................................................................................................................................................................................Hertz
~.................................................................................................................................................................Alternating current
n o .....................................................................................................................................................................No load speed
...........................................................................................................................Class II construction/Double insulation
Belt Sander
NA-WT661k-M-050802.indd 4
All manuals and user guides at all-guides.com
WT661K
2005-8-2 10:53:05