Technical Data - Royal Catering RC-CGE22 Guia Del Usuario

EN

TECHNICAL DATA

Parameter
Parameter value
description
Product name COFFEE GRINDER
RC-CG RC-CG RC-CG RC-CG
Model
M19 M20 M21 E22
Rated voltage
[V~]/ 220/50
Frequency [Hz]
Rated power [W] 200
Dimensions 150 132
(Width x Depth x232 132x228x470 x228
x Height) [mm] x425 x465
Weight [kg] 4,6 4,5 4,7
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Only use indoors.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
8
U S E R M A N U A L
The terms „device" or „product" are used in the warnings
and instructions to refer to COFFEE GRINDER.
2.1. ELECTRICAL SAFETY
a) The plug must fit the socket. Do not modify the plug
in any way. Using original plugs and matching sockets
reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an increased
risk of electric shock if the earthed device is exposed
to rain, comes into direct contact with a wet surface
or is operating in a damp environment. Water getting
into the device increases the risk of damage to the
device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e) If using the device in a damp environment cannot be
avoided, a residual current device (RCD) should be
applied. The use of an RCD reduces the risk of electric
shock.
and
f) Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
g) To avoid electric shock, do not immerse the cord, plug
or device in water or other liquids. Do not use the
device on wet surfaces.
h) ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
2.2. SAFETY IN THE WORKPLACE
a) Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b) If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
c) Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
d) In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
e) Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
f) Keep packaging elements and small assembly parts in
a place not available to children.
g) Keep the device away from children and animals.
2.3. PERSONAL SAFETY
a) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
b) To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
Rev. 20.05.2021
c) The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
d) Do not put your hands or other items inside the
device while it is in use!
2.4. SAFE DEVICE USE
a) Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b) Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces the
risk of accidental activation.
c) When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d) Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
e) Keep the device out of the reach of children.
f) Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
g) To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h) Avoid situations where the device stops working
during use due to excessive loading. This may result
in overheating of the drive elements and damage to
the device.
i) Do not touch articulated parts or accessories unless
the device has been disconnected from the power
source.
j) Do not move, adjust or rotate the device in the course
of work.
k) Do not leave this appliance unattended while it is in
use.
l) Clean the device regularly to prevent stubborn grime
from accumulating.
m) The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
n) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
o) Keep the device away from sources of fire and heat.
p) Do not cover the ventilation openings!
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The product is intended for grinding coffee beans.
The product is intended for home use only!
The user is liable for any damage resulting from
unintended use of the device.
Rev. 20.05.2021
EN
3.1. DEVICE DESCRIPTION
1
2
3
7 7
11
10 4
10
8
8
9
9
5
6
1. Funnel cover
2. Funnel
3. Scale regulator (grinding degree ring)
4. Base
5. Power cord
6. Power switch
7. Scale regulator positioner
8. Handle
9. Fuse
10. Microswitch
11. Control panel
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device is
being used. There should be at least 10 cm distance between
each side of the device and the wall or other objects. Keep
the product away from hot surfaces. The device should
always be used when positioned on an even, stable,
clean, fireproof and dry surface, and be out of the reach
of children and persons with limited mental and sensory
functions. Position the device such that you always have
access to the power plug. The power cord connected to
the appliance must be properly grounded and correspond
to the technical details on the product label. Disassemble
the device and all its components and clean them before
the first use.
3.3. DEVICE USE RC-CGM19
1. Turn the power switch on to start the engine.
2. Adjust the grinding degree ring to your preference
(before adding coffee beans).
• The desired grinding degree of the coffee should
be set between 1 and 19, with 1 being fine and 19
being coarse.
• To adjust the grinding ring, first loosen the
adjusting screw and then adjust the ring. Tighten
the screw.
3. Pour coffee beans into the funnel and put the cover
on.
1
2
3
4
5
6
9