Cleaning And Maintenance - nedis WIFICI10CWT Guía Rápida

WIFICI10CWT
Indoor IP camera
Description
1. Status indicator
2. Reset button
3. Speaker
4. Memory card slot (microSD)
5. Power input (Micro USB)
6. Climate sensor
Use
1. Download and install the app "Nedis SmartLife" from
Apple App Store or Google Play Store on your mobile
device.
2. Launch the app "Nedis SmartLife".
3. Create a new account or log in to your existing
account.
4. Tap "+" to add the device.
5. Select "Security Camera" from the list of products.
6. Insert the memory card into the memory card slot.
7. Plug in the climate sensor.
8. Use the USB cable to connect the power adapter to
the device. Insert the mains plug of the power
adapter into the wall socket.
9. If the status indicator does not flash: Press and hold
the reset button for 6 seconds.
If the status indicator flashes: Confirm in the app.
10. Confrm the Wi-Fi network and password.
11. Enter the device name.
Note: The device name will also be used for push
notifications.
12. Take one of these actions:
(a) Bend the camera to make sure it remains in
standing position.
(b) Mount the mounting bracket to the required
location using the screws or the double-sided
adhesive tape. Clamp the camera into the mounting
bracket.
13. If necessary, adjust the camera angle.
All manuals and user guides at all-guides.com
Safety
•
•
•
•
•
•
•

Cleaning and maintenance

Warning!
•
•
•
•
Support
If you need further help or have comments or
suggestions please visit www.nedis.com/support
3
To reduce risk of electric shock, this product should
only be opened by an authorized technician when
service is required.
Disconnect the product from the mains and other
equipment if a problem should occur.
Read the manual carefully before use. Keep the
manual for future reference.
Only use the device for its intended purposes. Do not
use the device for other purposes than described in
the manual.
Do not use the device if any part is damaged or
defective. If the device is damaged or defective,
replace the device immediately.
The device is suitable for indoor use only. Do not use
the device outdoors.
Do not expose the product to water or moisture.
Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device
does not operate correctly, replace it with a new
device.
Clean the outside of the device using a soft, damp
cloth.
English