Starting Up; Control Panel; Safety Thermostat - ICC RONER 80013 Manual De Instrucciones

INSTRUCTION MANUAL
J
.P. SELECTA s.a.u.
CODE 80300 REV C

6. STARTING UP

6.1 Control panel

1. Stop / Start cycle Key
2. Reduce value key
3. Increase value key
4. Adjustment (change between temperature / time).
6.2 Starting up
1. Press the start switch and at the same time the screen will light up.
2. Press the Up/Down keys (3/2) until the desired temperature value is selected
in the green display (the above one).
3. Press key (4) if you want to select an operating time.
4. Press key (1) to start the cycle.
5. The heating symbol will light up and flash.
6. Press key (1) again to stop the process.
Note: during operation, temperature or time adjustment value can be changed.
REMARKS:
* When using the time function, the green display (the above one) will indicate
the remaining time. If you want to see the target temperature value, press key
(4).

6.3 Safety thermostat

The equipment has a safety element to prevent overheating.
In case the thermostat triggers, press the rear button to reset the device.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
ABRIL 2019 (It can be modified without notice)
4
3 2
Page: 8
1
Tel 34 937 700 877 Fax 34 937 702 362