Cobra King LTD Guia De Instalacion página 2

ADJUSTABILITY INSTRUCTION GUIDE
Your KING LTD Metalwood is equipped with a new, revolutionary SpacePort sole design. This SpacePort serves as
a weight that strategically position the Center of Gravity both Low and Deep in the head, delivering the best com-
bination of Distance & Forgiveness. Its unique design also allows you to see inside the head for the very first time
allowing you to view all the technologies that are delivering Ultimate Distance to your game.
SPACEPORT WEIGHT REMOVAL AND INSTALLATION
Step 1: You can remove the SpacePort by using your wrench and
the SpacePort key (included within the KING LTD wrench pouch).
Place the key onto the lens area of the SpacePort ensuring all
four grooves on the bottom of the key align with the SpacePort
structure and it sits securely.
Step 2: Insert your wrench into the key. Pressing down firmly,
loosen the SpacePort by turning the wrench counterclockwise until
the SpacePort loosens and can be removed from the head.
Step 3: To reinstall the SpacePort, screw the SpacePort
clockwise back into the head with your hand. Once it is tight by
hand, place the key back onto the lens area of the SpacePort,
and use your wrench to complete the tightening process turning
clockwise to secure into place. A single, audible click indicates
the weight has been installed successfully.
EIGHT ADJUSTABLE LOFT SETTINGS TO MAXIMIZE DISTANCE AND OPTIMIZE TRAJECTORY
Step 1: Loosen the shaft by inserting the wrench into the hosel screw
and unscrew counterclockwise until the shaft is able to rotate.
Step 2: Rotate the shaft until your desired loft is aligned with the
window and re-insert the shaft into the clubhead.
Step 3: Tighten the screw clockwise. A single audible click indicates
the weight has been installed successfully.
To learn more about the adjustability features of your COBRA driver, please visit: www.cobragolf.com/instructionguide
The following information is for KING F7 and F7+ Drivers equipped with Cobra Connect
Track Your Distance
TM
with COBRA's first ever connected golf club.
STEP 1: Visit Cobragolf.com/cobraconnect to activate your account, create your player
profile and view detailed explainer videos.
STEP 2: Download the Arccos Driver app for your smartphone using the
®
iPhone ® App Store ® or Google Play TM .
STEP 3: Launch the Arccos Driver app, select the appropriate course, starting hole and
tee box and press "Start Round" – there's no pairing necessary! Your drive is recorded
on your tee shot and total distance is calculated as soon as you hit your second shot.
STEP 4: Keep your smartphone vertical in your front pocket while in play at all times.
The Arccos system uses the sensors and microphone in your phone to detect your tee
shot location and end point.
Step 5: Touch and drag anywhere on the screen while playing to access Rangefinder
mode and receive GPS distances to any point on a hole.
Step 6: Click EDIT to easily adjust your shot location or delete a drive.
Step 7: Review your driving stats post round to analyze your performance, share your
best drives and compete against playing partners, friends and the Arccos community
worldwide!
For setup guide and warranty info and to learn more about Cobra Connect visit: www.cobragolf.com/cobraconnect
technology.
TM
like never before