Homelite UT43160 Manual Del Operador página 5

 Maintain product with care. Keep cutting edge
sharp and clean for best performance and to
reduce the risk of injury. Follow instructions for
lubricating and changing accessories. Inspect
cord periodically and, if damaged, have it re-
paired by an authorized service facility. Inspect
extension cords periodically and replace if dam-
aged. Keep handles dry, clean, and free from
oil and grease.
 Check damaged parts. Before further use of the
product, a guard or other part that is damaged
should be carefully checked to determine that
it will operate properly and perform its intended
function. Check for alignment of moving parts,
binding of moving parts, breakage of parts,
mounting, and any other condition that may
affect its operation. A guard or other part that
is damaged should be properly repaired or re-
placed by an authorized service center unless
indicated elsewhere in this manual.
SPECIFIC SAFETY RULES
Page 5 — English
 Disconnect the plug from power source when
not in use, before servicing, and when changing
accessories.
 Service on the product must be performed by
qualified repair personnel only. Service or main-
tenance performed by unqualified personnel
could result in injury to the user or damage to
the product.
 If the power supply cord is damaged, it must
be replaced only by the manufacturer or by an
authorized service center to avoid risk.
 Save these instructions. Refer to them frequently
and use them to instruct others who may use
this product. If you loan someone this product,
loan them these instructions also to prevent
misuse of the product and possible injury.