SKP Pro Audio EQD 312 Manual Del Usuario página 3

Qcualizador digital estereo profesional
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
position does not interfere with it's proper ventilation. For example, the
appliance should not be situated on a sofa, bed, or similar surface that may
block the ventilation opening; or keep the appliance away of those objects
such as newspapers, carpet which may cover the ventilation opening or
impede the flow of air through the ventilation opening.
7. Power Source & Power Cord
a power supply only of the type described in these operating instructions, or
marked on the unit.
Power supply cord should be routed so that the are not likely to be walked
upon or pinched by the items placed on or against them. When removing
the cord from a power outlet be sure to remove it by holding the plug
attachment and not by pulling on the cord.
Check the total maximum power of your AC wall outlet and make sure it
has the enough power to match the Power Consumption of this appliance,
otherwise you could overload the wall outlet, which could cause fire.
8. Internal / External Voltage Selectors
selector switches, if any, should only be reset and re-equipped with a
proper plug for alternative voltage by a qualified service technician . Do not
attempt to alter this yourself.
9. Object & Liquid Entry
liquids are not spilled in to the inside of the appliance.
! Unplug the appliance first and clean only with a dry cloth.
10. Cleaning
11. Non-use Period
unplugged from the outlet when left unused for long periods of time.
12. Unpacking & Setup
after unpacking(before connecting) and contact your dealer in case of any
related complains. Take care of choosing your installation place and the
correct AC connection. If built in to a case, be aware that the depth and the
weight of some kind appliance(such as Amplifier) does require an
additional fixing on the backside or the use of rack shelf supports. Never
mount the amplifier in a rack just by fixing it on the front plate –
Manufacturer takes no responsibility in this case.
13. Damage Requiring Service
has been damaged in any way, such as power cord or plug is damaged,
liquid has been spilled or objects have fallen in the appliance, the appliance
has been exposed to rain or moisture, does not operate normally, or has
been dropped. Refer all servicing to qualified service personnel or contact
your dealer. Do not attempt to repair by yourself.
2
! This appliance should be connected to
! Take care to avoid any objects falling into or
!
The power cord of the appliance should be
! Please check your appliance for any damage
! Servicing is required when the appliance
! Internal of external voltage

Publicidad

Tabla de contenido
loading

Tabla de contenido