Requires microphone (included) .
1. Plug the microphone (see below figure) into the MIC 1 INPUT or MIC 2 INPUT.
2. Slide the ON /OFF switch to ON.
3. Adjust the microphone volume to your desire level by rotating the MIC VOLUME knobs
(on the top of the unit).
. 4 Sing along with the music.
Connect the Headphone or Earphone
Simply connect a low impedance
to PHONES jack of SD520. The speaker will be cut off when the headphone / earphone is plug in.
Headphone
(Not Included.)
Sing with Microphone
FRONT VIEW OF MACHINE
3.5mm ( max. 32 ohm) stereo headphone / earphone (not included)
10