Valley Electronics Daysy Instrucciones De Uso página 6

10
Step 1: Charging and
activating your Daysy
1. Connect your Daysy to the micro USB cable supplied in your package.
2. Connect the cable to a USB port. Make sure it is a 5V port that
does not supply more than a 1A current.
3. Press briefly on the activation Button to see the charging status. Daysy will
return to sleep mode after 60 seconds.
4. As your Daysy charges, the blue light on the activation ring will move from
the bottom upward. All the blue lights will light up once the battery is fully
charged.
5. Disconnect the cable from your Daysy. You can now begin using your Daysy.
Measurement indicators:
What each indicator means
Violet light is flashing: Your Daysy is asking if you are
menstruating. Confirm that you are menstruating by holding
down the activation button for 2 seconds.
The violet light remains constantly illuminated: Daysy confirms
your menstruation input. If you have entered your menstruation
incorrectly or by mistake, hold the activation button for 2 seconds
until the violet light starts flashing again.
Blue lights rotating in a clockwise direction: Your Daysy is
measuring your temperature. Holding down the activation button
for 2 seconds stops the measurement.
11