ESCALADE Atomic G01354W Instrucciones De Montaje página 10

PARTS REQUIRED:
2 pcs - P18 Ball Return Tube
STEP 8:
Attach P18 Ball Return Tubes between
P8 Goal Boxes and P9 Ball Catchers as
shown in FIGURE 8.
12 pcs - H2 Carriage Bolt
8 pcs - H8 Allen Head Bolt
8 pcs - H9 Flat Washer
STEP 9:
Attach P3 Legs using H2 Carriage Bolts with H13 Flat Washers, H15 Lock Washers and H11 Hex Nuts as shown
in FIGURE 9. Do not tighten bolts.
Attach P7 End Leg Panels between P3 Legs using H8 Allen Head Bolts with H9 Flat Washers and H10 Barrel Nuts
as shown in FIGURE 9. Tighten H2 Bolts using T1 Allen Wrench and T2 Wrench but Do not overtighten H8
Bolts.
Thread P11 Leg Levelers onto P3 Right Legs and P4 Left Legs as shown in FIGURE 9.
H9
H8
H9
H2
IMPORTANT NOTE:
Do Not overtighten
H8 Bolts.
All Rights Reserved.
© 2012 Escalade Sports
All manuals and user guides at all-guides.com
P9
P8
PARTS REQUIRED:
8 pcs - H10 Barrel Nut
12 pcs - H11 Hex Nut
12 pcs - H13 Flat Washer
P11
H8
P3
H9
H10
P11
P7
H13
H15
P18
12 pcs - H15 Lock Washer
4 pcs - P3 Leg
2 pcs - P7 End Leg Panel
P11
H9
P3
H10
P3
H11
10
P8
P18
FIGURE 8
4 pcs - P11 Leg Leveler
1 pc - T1 Allen Wrench
1 pc - T2 Wrench
P11
P7
P3
FIGURE 9
For Customer Service Call 1-888-996-2729
P9