Sunex Tools 5207 Manual De Operación página 4

PREVENTATIVE MAINTENANCE
This is the safety alert symbol used for the PREVENTATIVE MAINTENANCE section of this manual to alert you to potential
personal injury hazards. Obey all instructions to avoid possible injury or death.
1. Always store the this device in a well protected area where it will not be exposed to inclement weather, corrosive vapors,
abrasive dust, or any other harmful elements.
2. Every device owner is responsible for keeping the device labels clean and readable. Use a mild soap solution to wash external
surfaces of the device. Contact Sunex for a replacement label if the device's label is not readable.
3. Inspect the device before each use. Do not use the device if any component is cracked, broken, bent, or shows sign of damage.
Do not use this device if it has loose or missing hardware or components, or is modified in any way. Take corrective action before
using the device again.
OWNER/USER RESPONSIBILITY
The owner and/or user must have an understanding of the manufacturer's operating instructions and warnings before using this device.
Personnel involved in the use and operation of equipment shall be careful, competent, trained, and qualified in the safe operation of the
equipment and its proper use when servicing motor vehicles and their components. Warning information should be emphasized and
understood. If the operator is not fluent in English, the manufacturer's instructions and warning shall be read to and discussed with the
operator in the operator's native language by the purchaser/owner, making sure that the operator comprehends its contents. Owner
and/or user must study and maintain for future reference the manufacturers' instructions. Owner and/or user is responsible for keeping
all warning labels and instruction manuals legible and intact. Replacement labels and literature are available from the manufacturer.
INSPECTION
WARNING
Failure to follow these Inspection instructions may result in serious injury or death, and/or property damage.
Visual inspection should be made before each use of the engine support bar, checking for damaged, loose or missing parts. Each
engine support bar must be inspected by a manufacturer's repair facility immediately if subjected to an abnormal load or shock.
Any engine support bar which appears to be damaged in any way, is found to be badly worn, or operates abnormally MUST BE
REMOVED FROM SERVICE until necessary repairs are made by a manufacturer's authorized repair facility. It is recommended that
an annual inspection of the device be made by a manufacturer's authorized repair facility and that any defective parts, decals or
warning labels be replaced with manufacturer's specified parts.
A list of authorized repair facilities is available from the manufacturer.
LIMITED WARRANTY
SUNEX INTERNATIONAL, INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY'S SUNEX TOOLS
BRANDED PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS.
Sunex International, Inc. will repair or replace its Sunex Tools
defective workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed to that
specific product. This product carries a ONE-YEAR warranty. During this warranty period, Sunex Tools will repair or replace at our
option any part or unit which proves to be defective in material or workmanship.
Other important warranty information:
This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not cover any
repairs or replacement made by anyone other than Sunex Tools
The foregoing obligation is Sunex Tools' sole liability under this or any implied warranty and under no
circumstances shall we be liable for any incidental or consequential damages.
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. If you have any questions about warranty service, please contact Sunex Tools
you specific legal rights and you may also have other rights which vary from state to state. Repair kits and replacement parts are
available for many of Sunex Tools products regardless of whether or not the product is still covered by a warranty plan.
SHIPPING ADDRESS:
Sunex Tools
315 Hawkins Rd.
Travelers Rest, South Carolina 29690
5207
®
branded products which fail to give satisfactory service due to
®
or its authorized warranty service centers.
MAILING ADDRESS:
Sunex Tools
P.O. Box 1233
Travelers Rest, South Carolina 29690
4
MODEL 5207
CAPACITY: 700 LBS.
ENGINE SUPPORT BAR
®
. This warranty gives
rev. 09/16/20
®