NewAir NKR058MB00 Manual Del Propietário página 19

Installing the Beer Keg and Beer Keg Stand
The keg stand is required when using 30 liter (1/4 barrel) "pony" style kegs
only. To install:
1. Position the keg stand directly in front of the open kegerator cabinet.
2. Using proper lifting technique, carefully lift the beer keg by the handles
and place it onto the keg stand.
3. Brace your knees behind the keg stand and grasp the keg stand handles.
4. Lift the front of the keg stand so that the front edge of the stand is resting
on the front edge of the keg cooler.
5. Grasp the front keg stand handles and carefully slide the keg stand all the
way into the keg cooler.
Tapping the Keg
1. Pull the tap handle out and away from the keg coupler (1).
2. Push down until it locks into position (2) and your keg will be tapped.
www.newair.com
EN
19