CLEANING & MAINTENANCE
KEGERATOR MAINTENANCE
• Ice build-up will defrost automatically, so there is no need to defrost the
refrigerator.
• Defrost water collects inside of the drain trough and passes through a drain
outlet in the rear wall into a drain pan situated above the compressor,
where it will evaporate.
• If you do not intent to use the appliance for long periods of time, disconnect
the power cord, clean the appliance, and leave the door slightly open to help
prevent mold and mildew from accumulating inside of the cabinet.
CLEANING YOUR KEGERATOR
• Turn off the power, unplug the appliance, and remove all items.
• Wash the inside surfaces with warm water and baking soda solution. The
solution should be about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning area of the
controls, or any electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse
and wipe dry with a clean soft cloth.
• Dust the front grill and back of the unit twice yearly. Make sure the power is
off before cleaning.
• It is recommended to clean the unit completely inside and out yearly to
maximize the longevity of the product.
MOVING YOUR KEGERATOR
• Remove the keg and any other items you may have inside the unit.
• Securely tape down all loose items (shelves) inside your appliance and tape
the door shut.
• Turn the adjustable leg up to the base to avoid damage.
• Be sure the appliance stays secure in the upright position during
transportation.
• Protect the outside of the appliance with a blanket or similar item.
www.newair.com
EN
22