AMAZON COMMERCIAL B07XGBKT1Z Manual Del Usuario página 13

NOTICE
IMPORTANT NOTICE: CUSHION MOUNT DETAIL:
When the cushion mount is installed correctly, the lip of the sink flange
fits into the groove on the inside of the cushion mount and the mount
ring can be pulled downward over the cushion mount and will rotate
freely. The bottom bead of the cushion mount acts as a gasket between
the bottom of the sink flange and the top of the disposal.
7
Sink
Bottom "lip" of
sink flange fits
into "groove" of
cushion mount.
Groove
Attaching the discharge elbow
8
2
• Install the provided pre-assembled discharge elbow/gasket assembly
(O & P) and flange (Q). Install and tighten two screws (R) evenly with a
screwdriver.
NOTICE
Do not remove the gasket and place it on the disposal
between the elbow and disposal. It must stay on the elbow to make a
proper seal.
Mount ring
Cushion mount
1
P
R
Q O
EN
13