Publicidad
Idiomas disponibles
Idiomas disponibles
2. Press the "POWER" button.
3. Press the "START" button after blinking digits stop.
4. Start measuring, the cuff will inflate automatically.
5. After detecting Systolic / Diastolic and Pulse Values, the measured values will
be displayed on LCD panel screen.
6. To measure 2nd person, after pressing Power and blinking digit stops, press Page,
the number 2 will appear, press Start
2. To view the previous measured values (Memory)
The main unit automatically stores the previous measured values.
(Even after batteries are replaced, the previous values are stored in 1 minute.)
1.
Power off and then power on your unit.
2.
Press "MEMO" button, this will enable you to recall previous values for the first person.
3.
If you press "MEMO" button successively, then you can read next values.
4.
Press "PAGE" button, then you can read second person's measured values.
5.
Press "MEMO" button successively to continue checking second person's values.
6.
Stored capacity is up to 30 sets each page (60 total).
All manuals and user guides at all-guides.com
-6-
Publicidad
Capítulos
