OR
EN
Rubber Eyecups (2b)
To use the binoculars while wearing glasses, turn the rubber eyecups (2b) towards
the sides and down. If you are not wearing glasses, leave the eyecups in the upright
position to achieve the required distance from the pupils.
Adjusting the eyepiece distance
The distance between the eyes differs between individuals. To achieve perfect inte-
raction between your eyes and the eyepieces of your binoculars set the angle at the
centre of the binoculars (1) so that you see a circular image (12). Note this setting
for later use.
Adjusting the focus
Look through your binoculars with your right eye closed. Now adjust the image for
your left eye using the centre wheel (6) until it is sharp and clear. Close your left eye
and adjust the image for your right eye using the dioptre ring (3) until it too is sharp
and clear.
10