Place A Call; Send A Message - Iridium GO! Guia De Inicio Rapido

STEP 4: Use the Iridium GO! and Iridium Mail Apps
Iridium GO! App
Note: Twitter is Currently
not Supported.

Place a Call

1. Select Call from the main screen.
2. Enter the full dialing sequence: 00 or + [Country Code] [Phone Number], or use
the Country flag dropdown menu.
Note: If you are dialing from existing Contacts, make sure to edit and insert the
international access and country code (ex. +81) to complete calls on the Iridium network.
3. Press the green key to initiate the call, and press the red key to end the call.

Send a Message

1. Select Messages from the main screen.
2. Enter recipient (00 or + [Country Code] [Phone Number]), or use the Country flag
dropdown menu and enter mobile phone number, or enter an e-mail address.
Track
1. To set up Quick GPS: go to the Iridium GO! App Settings menu, select Track, and
then enter Quick GPS recipients.
2. To send a Quick GPS: press Track on the Iridium GO! App menu, wait for location,
and press Quick GPS to send.
3. To set up Interval Tracking: go to the Iridium GO! App Settings menu, select
Track, set the Tracking Frequency, and then enter Tracking Recipient.
4. Once Interval Tracking is set up, regular tracking messages will be sent
automatically even if the Iridium GO! App or smartphone is off.
Note: Usage fees apply for Quick GPS and Interval Tracking; settings will apply until modified.
Iridium GO! Quick Start Guide 13