Remote Access - Ebode IPV58P2P Guia De Inicio Rapido

3. Click the "Save" button and disconnect the network cable. Don't power off the camera
until it can be displayed in the IP Camera Tool. If the camera does not show up, (this might
take up to 5 minutes) try unplugging the power cable from the camera and plugging it back
in. It should connect to the wireless network automatically if the encryption password is set
up correctly.

5. Remote Access

If you need to access the IP camera outside of your LAN, you have two options:
By P2P: if you want to access the camera by Smartphone remotely.

1. Search and install the free application named "ebode", for iOS device in the App Store
or for Android device in Google Play. Please note that only the above application is
recommended by ebode electronics and that all other apps are not compatible with your
ebode P2P camera.
2. Run the APP and go to IPC management page, click QR scan button. Scan the QR
code on the bottom label of your camera.
2.Click here.
1.Click here.
3. In the result page, input the Username and Password of your camera, then you can
see your camera in the list, click it to connect and enjoy the live video.
25-8-2014
All manuals and user guides at all-guides.com
If you scan a QR code at the bottom
of the camera successfully, the UID
will be displayed automatically.
Default username is admin with no
Click OK.
- 9 -
password.
ebode IPV58P2P