SimonsVoss ALLEGION SmartCD Manual página 13

All manuals and user guides at all-guides.com
Configuration of uSB ConneCtion.
After you have connected the SmartCD with the PC/laptop for the first time using
the USB cable, the Windows operating system will state that it has discovered
new USB hardware. Follow the instructions in the installation menu and install the
driver enclosed on the CD provided onto your desktop computer.
Starting uP the Smart Cd.
: : The built-in batteries are precharged and the device is therefore ready to use
immediately. We recommend that you charge the SmartCD for about 1 hour at
the USB port before using it for the first time.
: : Connect the SmartCD by USB with the PC/laptop.
: : Install USB driver for the SmartCD on the PC/laptop (see enclosed CD).
To use the SmartCD with a PDA, please carry out the following additional steps:
: : Install the LSM Mobile Edition locking plan software on the PDA using
ActiveSync.
: : Connect the SmartCD and PDA by Bluetooth.
: : Set the COM port on the PDA for the SmartCD.
11