Maintenance; Battery Replacement; Cleaning - Minipa MT-360 Manual De Instrucciones

8. MAINTENANCE

8.1 Battery Replacement

This instrument is supplied with 9V (NEDA 1604, IEC
6F22).
The symbol
replacement is necessary. To replace the battery,
follow the procedure listed below:
1- Pull off battery cover, by gently sliding it towards
the bottom of the meter.
2- Disconnect the old battery from the meter and re-
place with a new unit.
3- Wind the excess lead length and put the top of
battery beneath the battery chamber. Install the
battery and put the battery cover.
4- When battery is installed, the meter turns on auto-
matically to check the battery conditions. Power
will turn off automatically after 10 seconds with-
out operation.

8.2 Cleaning

Periodically wipe the housing with a damp soft cloth
and mild detergent, do not use abrasives or sol-
vents.
appears in LCD display when the
16