Minipa MT-360 Manual De Instrucciones página 8

ε:
The thermal emissivity of the object can be
set using the
Emissivity Table)
ALM Hi: The upper limit alarm temperature is set us-
ing the
temperature is exceeded the Hi set point,
the beeper emits a discontinuous pulse tone
and ALM Hi is displayed.
ALM Lo: The lower limit alarm temperature is set us-
ing the
temperature is below the Lo set point, the
beeper emits a continuous pulse tone and
ALM Lo is displayed.
MAX: The maximum temperature during measure-
ment is displayed.
MIN: The minimum temperature during measure-
ment is displayed.
Key
Press key to on the
press trigger and the laser beam will turn on and
indicator will blink. Releasing trigger to turn off the
laser beam.
Key
Use key to select turn on or off the backlight func-
tion.
°C / °F Key
Readings are displayed in either degrees Celsius
(°C) or degrees Fahrenheit (°F). When the thermo-
and
and keys. When the measured
and keys. When the measured
indicator. If
7
keys. (Refer to 6.6
indicator is on,