Kobalt 45876PKDLG Manual De Usuario página 4

ASSEMBLY INSTRUCTIONS
INSTALL SHELF BRACKETS INTO WALL STUDS
1. Locate the wood studs approximately 32 in. apart.
Place right bracket (C) at desired height, mark
hole locations with pencil and pre-drill with 3/16 in.
drill bit.
2. Place left bracket (D) on second stud level with
right bracket (C), mark hole locations with pencil
and pre-drill with 3/16 in. drill bit.
3. Install brackets (C & D) with 3 screws (AA)
using 12 mm size nut driver or socket wrench.
Hardware Used
Ø 8 x 50.8 mm Screw
IMPORTANT: Brackets must be mounted level to each other and the screws must be securely
driven into the wood. Do not overtighten the screws.
1
2
3
x 6
4
32 in.
16 in.
32 in.
16 in.
32 in.
16 in.
wall studs
wall studs
wall studs