Aux In Operation - Sound-X NPCD-270 Manual De Instrucciones

Program Play
Programming Disc Play
This feature programs the order in which tracks are played.
1. After CD is loaded, ensure the CD is in stop mode.
2. Press MODE button, "PROGRAM" flashes and "--P 01" appears on the display.
3. Press or
4. Press MODE button to confirm. "--P 02" appears on the display.
5. Repeat steps 3 and 4 to program other tracks for your desired sequence. Up to 20
tracks can be stored for programmed play.
6. Press PLAY/PAUSE (
Note:
• To cancel Programmed Play mode before the sequence begins, you may either power
off the unit or open the CD tray.
• When in Programmed Play mode, press STOP button to stop the Programmed Play
mode. If PLAY button is pressed again, you return to the already Programmed Play
mode.
• To cancel Programmed Play mode, press STOP button twice.
Editing Programmed Memory
1. While stopped in Programmed Play mode, press MODE button repeatedly until the
desired programmed track is selected.
2. Press or
with.
3. Press MODE button again to confirm.
4. Repeat steps 1-3 to edit other programmed tracks.

AUX IN OPERATION

Caution: Turn off power and unplug the power cord before connection.
You can connect to other audio equipment through an audio cable (not included) including
a video recorder to provide sound output for other audio equipment.
Preparation
1. Connect the audio equipment's "LINE OUTPUT" to "AUX IN" jack of the unit using an
audio cable (not included).
2. Press the FUNCTION button to AUX IN mode.
3. Adjust VOLUME control to your listening preference.
Note:
When not in use, set the player to CD or OFF.
CD70 Eng A.indd 9
All manuals and user guides at all-guides.com
to locate a desired track.
) button to play your programmed sequence.
button to select the track you want to replace the programmed track
GB - 9
009/7/3 :9:4 AM