Troubleshooting Guide - Sound-X NPCD-270 Manual De Instrucciones

TROUBLESHOOTING GUIDE

SYMPTON
No power even
when STANBY is set
to "ON".
CD will not play
No sound
Sound skips
CD70 Eng A.indd 0
All manuals and user guides at all-guides.com
CAUSE
• Poor AC plug connection.
• Disc is loaded upside
down.
• Disc is dirty.
• Disc error.
• Improper amplifier
operation.
• Player is subject to
vibrations or physical
shock.
• Laser lens is dirty.
• Disc is dirty.
GB - 0
ACTION
• Insert AC power plug firmly into
AC outlet.
• Reload disc with label facing
upwards.
• Clean disc with a soft cloth.
Wipe in a straight motion from
inside to outside of the disc.
• Reload correct disc and wait
ten seconds, the switch unit
back on and retry.
• Make sure that volume controls
set properly.
• Change the position of player
propertly.
• Clean using a quality laser lens
cleaner.
• Clean disc.
009/7/3 :9:4 AM