Circutor MD5060e Manual De Uso página 42

All manuals and user guides at all-guides.com
Activated, enables programming of 25 V
step tests voltages
Activated, enables programming of 100 V
step tests voltages
Activated, enables programming of 500 V
step tests voltages
Selection of 500 V test voltage
Selection of 1 kV test voltage
Selection of 2.5 kV test voltage
Selection of 5 kV test voltage
These keys (decrease or increase) enable
the selection of the value that is being
programmed.
Activates / enables programming of the limit
for the "Pass / Fail" test
Start - Start test
Stop - End of test
25 V steps activated
100 V steps activated
500 V steps activated
Indicates 500 V selected
Indicates 1 kV selected
Indicates 2.5 kV selected
Indicates 5 kV selected
Indicates when the
measured resistance is
lower than programmed
limit
Indicates that the test is
being executed
43
–
–